This guide outlines the procedure for updating the firmware for the Kmbox-net version.


Note: This procedure is the same regardless of the firmware file version.

  1. Power On the Kmbox-net:
  • Turn on your Kmbox-net and note the version date displayed on the screen.
  1. Compare Firmware Dates:
  • Check the version date against the date of the .bin file you downloaded. If they match, no update is necessary.
  1. Connect the Kmbox-net:
  • Plug one end of the Kmbox USB cable into a secondary PC (recommended to keep your main PC clean). Leave the other end unplugged for now.
  • Locate the small black button near the plastic window inside the Kmbox-net. Use a paperclip or a slim screwdriver to press and hold this button.
  1. Enter Firmware Update Mode:
  • While holding the button, connect the Kmbox-net to your gaming PC via the USB cable. The solid white screen and flashing blue LED indicate that the device is in firmware update mode.
  1. Install Drivers:
  • Extract the downloaded archive to your desired location and run the 01-Drive application. Follow the installer prompts until completion. You can uncheck the box at the end to avoid launching the application.
  1. Run the Upgrade Tool:
  • Open the 02-Upgrade Tool application and configure your settings as shown in the guide. If your device does not appear, ensure the Kmbox-net is in firmware install mode and that the drivers are installed. Click “Select File”.
  1. Select Firmware File:
  • Ensure the file type is set to .bin. Locate and select your firmware file.
  1. Start the Update:
  • Click the “3. Program” button to initiate the update. Do not disconnect the Kmbox-net during this process.
  1. Completion:
  • Once the update is finished, you should see an output message confirming the update.

Verify that the version date on your Kmbox-net is now updated to a more recent version.

By following these steps, you will successfully update the firmware on your Kmbox-net device.

Complete

Leave a Reply

Your email address will not be published. Required fields are marked *